Panasonic KX-TDA50 Installation Manual page 37

Removing/Attaching the Front Cover
If you prefer, you can remove the front cover.
Removing the Front Cover
Holding the front cover open at about a 45° angle, remove the front cover by pushing it in the direction of the
arrow as shown below.
Attaching the Front Cover
Fit the front cover to the main unit as shown below, and then close the front cover.
Closing the Covers
1.
Close the front cover, then tighten the three screws.
Document Version 2010-11
2.2.3 Opening/Closing the Covers
Screw
Installation Manual 37