Spa Water Maintenance Schedule - Master Spas jet Away Owner's Manual

Master Spa Parts
SPA WATER MAINTENANCE - START-UP
Freedom Spas
DAY ONE
1. Test and adjust total alkalinity if necessary to between 80 to 150 ppm using
2. Test and adjust pH if necessary to within the range of 7.2 to 7.8 using the
3. Test and adjust sanitizer level. Add chlorine following label directions to
4. Add a water clarifier following label directions. If the spa is equipped with
5. Use a small amount of defoamer only if necessary.
DAY TWO SKIP
DAY THREE
1. Test and adjust total alkalinity, if necessary, to between 80 and 150 ppm using
2. Test and adjust the pH, if necessary, to within the range of 7.2 to 7.8 using
3. Test and adjust sanitizer level. Add chlorine following label directions to
4. Add sequestering chemical, following label directions for maintenance.
5. If necessary, clean water line with a spa general purpose cleaner or enzyme
6. Use a defoamer only if necessary.
(cont. next page)
America's Leader In Luxury
Master Spa Parts - 1068 American Drive, Neenah, WI, 54956, USA
(For Spas without Eco Pur
the pH / alkalinity increaser or decreaser 1oz. at a time. Wait 15 minutes,
retest and adjust if necessary. The pump should be running on high speed
during this time with the air controls closed.
pH / alkalinity increaser or decreaser 1/2oz. at a time. Wait 15 minutes,
retest and adjust if necessary. The pump should be running on high speed
during this time with the air controls closed.
maintain a free chlorine level of 1 to 3 ppm. If using bromine, adjust feeder
to maintain a total bromine level of 3 to 5 ppm. Add bromine tablets to the
dispenser if necessary, following label directions.
an ozone unit, we recommend adding an enzyme product in place of the
clarifier, following the label directions.
the pH / alkalinity increaser or decreaser, 1oz at a time. Wait 15 minutes,
retest and adjust if necessary. The pump should be running on high speed
during this time with the air controls closed.
the pH / alkalinity increaser or decreaser, 1/2oz at a time. Wait 15 minutes,
retest and adjust if necessary. The pump should be running on high speed
during this time with the air controls closed.
maintain a free chlorine level of 1 to 3 ppm. If using bromine, adjust feeder
to maintain a total bromine level of 3 to 5 ppm. Add bromine tablets to the
dispenser if necessary, following label directions.
product.
Call Us Today : (920) 727 - 1700
™ Mineral Purification System)
25
M A S T E R S P A S