Site Preparation - Master Spas jet Away Owner's Manual

Spa
Table of Contents

Advertisement

Master Spa Parts
SITE PREPARATION / GENERAL GUIDELINES
Portable spa installation is simple when properly planned.To that end it is impor-
tant that you read the following information carefully and consult with your
Master Spas dealer.
1) Access - The actual dimensions of your new spa will determine the amount of
2) If the spa is being installed indoors, dimension limitations such as stairs,
3) Surface/Pad Requirements - When your new spa is filled with water and
When installing your spa indoors or on a wood deck or balcony, the same load
requirements must be met.Total load may be as much as 90 pounds per square
foot.You should speak with a qualified contractor or your local building depart-
ment to confirm that your surface is adequate for supporting a spa. Be sure to
locate your spa so that equipment remains above grade and is not subject to
flooding.
The equipment side(s) of the spa must be accessible in the event that future serv-
ice is needed. Periodical maintenance checks require entry into the equipment
bay.When possible, it is wise planning for the future to leave access to all sides of
the spa in the event your spas plumbing requires maintenance.Your spa warranty
does not cover the cost of providing access for service.
America's Leader In Luxury
Master Spa Parts - 1068 American Drive, Neenah, WI, 54956, USA
space that is needed in moving the spa from curbside to its final installation
area. Be sure to measure side yard dimensions, gates or doors and vertical
obstructions such as roof overhangs and overhead cables. Any other space
limiting obstacles such as trees or shrubs must be evaluated.
ceilings and walls must be taken into consideration. Please have your Master
Spas dealer or delivery service review site or installation plans prior to
delivery.
bathers, it may weigh as much as several tons. It is imperative that the base
beneath the spa can support the actual weight.The spa must be on a
uniformly firm, continuous, and level surface.The recommended foundation
is a concrete pad with a minimum thickness of four (4) inches with steel
reinforcement bars crossed throughout the pad.
Call Us Today : (920) 727 - 1700
IMPORTANT
14
M A S T E R
S P A S

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents