Specifications - Sherwood Newcastle P-965 Operating Instructions Manual

Specifications

PRE AMPLIFIER SECTION
Analog Audio
• Total harmonic distortion, output 1 V, 1 kHz
• Intermodulation distortion
60 Hz : 7 kHz = 4 : 1 SMPTE, 8 Ω, output 1 V
• Input sensitivity/impedance, output 1 V
Phono (MM) | 2.5 mV/47 kΩ
Line (CD, TAPE MONITOR, VIDEO)
• Signal to noise ratio, IHF "A" weighted
Phono (MM) | 72 dB
Line (CD, TAPE MONITOR, VIDEO)
• Frequency response
Phono (MM), RIAA, 30~20, 000Hz
LINE (CD, TAPE MONITOR, VIDEO), 10~100,000 Hz
• Output level
TAPE MONITOR REC, 1 kΩ
PRE OUT(Front, Center, Surround, Surround back, Subwoofer), 1 kΩ
• Bass/Treble control, 100 Hz/10 kHz
• Maximum output | 9 V
Digital Audio
• Sampling frequency
• Digital input level
Coaxial, 75 Ω
| 0.5 Vp-p
Optical, 660 nm
VIDEO SECTION
• Video format | PAL
• Input sensitivity(=Output level), 75 Ω
Video(Composite (normal))
S-Video(luminance signal)
(chrominance signal)
Component video(R-Y signal)
FM TUNER SECTION
• Tuning frequency range
• Usable sensitivity, THD 3 %, S/N 26 dB
• 46 dB quieting sensitivity, mono/stereo
• Signal to noise ratio, 65 dBf, mono/stereo
• Total harmonic distortion, 65 dBf, 1 kHz, mono/stereo
• Frequency response, 20 Hz~15 kHz
• Stereo separation, 1 kHz
• Capture ratio | 3.0 dB
• IF rejection ratio | 120 dB
AM TUNER SECTION
• Tuning frequency range
• Usable sensitivity | 12.5 mV
• Signal to noise ratio | 51 dB
• Selectivity | 30 dB
GENERAL
• Power supply | 230 V~50 Hz
• Power consumption | 50 W
• Switched AC outlet | TOTAL 100 W max.
• Dimensions(W H D)
• Weight(Net) | 18.5 kg(40.8 lbs)
Note: Design and specifications are subject to change without notice for improvements.
| 0.05 %
| 0.09 %
| 200 mV/47 kΩ
| 100 dB
| 1.0 dB
| 180 mV
| 10 dB
| 32, 44.1, 48, 96, 192 kHz
| -15~-21 dBm
| 1 Vp-p
| 1 Vp-p
| 0.286 Vp-p
| 0.5 Vp-p
(B-Y signal) | 0.5 Vp-p
(Y signal) | 1.0 Vp-p
| 87.5~108 MHz
| 17.2 dBf
| 25.2/43.2 dBf
| 72/68 dB
| 1.5 dB
| 45 dB
| 522~1611 kHz
| 440 166 380 mm(17-3/8 6-1/2 15 inches)
| +0, -3 dB
| 1.0 V
| 0.2/0.3 %
66