Digital Audio Recording With Md Recorder - Sherwood Newcastle P-965 Operating Instructions Manual

Start recording on the component
3
connected to VIDEO 1.

DIGITAL AUDIO RECORDING WITH MD RECORDER

• Only when the OPTICAL or COAXIAL DIGITAL OUT of this unit is connected to the OPTICAL DIGITAL IN of the MD recorder
or CD recorder, you can enjoy high-quality sound of digital recording without converting the original signals. Refer to
"CONNECTING AUDIO COMPONENTS" and "CONNECTING DIGITAL INs and OUTs" on page 5 and 7 and the operating
instructions of the MD recorder or CD recorder.
• However, when the COAXIAL DIGITAL OUT is connected to the component installed in another room for ROOM 2 playback,
the digital signals from the COAXIAL DIGITAL OUT will be used for ROOM 2 playback.
Notes:
• Digital recording is available for the digital audio program sources such as CDs, MDs, some DVDs, etc.
• In most DVDs as well as some CDs, etc., digital recording may not be available depending on the signal format.
• There are some restrictions on recording digital signals. When making digital recordings, refer to the operating instructions of
your digital recording equipment to know what restrictions are imposed.
Select a desired input of CD, AUX and
1
VIDEO 1~VIDEO 6 as a recording source.
INPUT SELECTOR
VIDEO AUDIO
or
Start recording on the component
3
connected to OPTICAL or COAXIAL
DIGITAL OUT.
POWER ON
STANDBY
AUD1
TUNER VID1
CD VID2
T.MON VID3
AUX VID4
PHONO VID5
PAGE1
40
Start play on the components connected to
4
VIDEO 2 and CD respectively.
• The audio signal from the CD and the video signal
from the VIDEO 2 will be dubbed and you can
enjoy them on the TV set and from the speakers.
• When the VIDEO 2(/ROOM 2) IN/OUT jacks are
connected to video recording component such as
video deck, etc., in the same manner, recording with
VIDEO 2 can be performed.
(If this is the case, be sure to deactivate the ROOM
2 function.)
For digital recording, select the desired
2
digital input as recording signal input.
STANDBY
DIGITAL/ANALOG
or
• Each time this button is pressed, the corresponding
input is selected as follows:
DIGITAL ANALOG
Note : When the selected digital input is not
connected, "DIGITAL" is flickering,
meaning no recording as well as no sound.
Start play on the desired input.
4
POWER ON
AUD2
SLEEP D/A
DIMM S.A/B
ROOM2 SUR.B
T.TON PURE
OSD PARA.
PAGE1