Sherwood Newcastle P-965 Operating Instructions Manual page 56

When selecting the DIGITAL RE-MASTERING
Press the CURSOR UP( )/DOWN( ) buttons to select the DIGITAL RE-MASTERING.
1
POWER ON
STANDBY
MAIN
CH.
SET
VOL CH/
ADJUST
MUTE
DECODE
DSP DSP
RETURN
STEREO
1 3
2
4 6
5
7 9
8
OSD/MENU
0
DISP ENT
MI M2 M3
Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired mode.
2
POWER ON
STANDBY
MAIN
CH.
SET
CH/
VOL
ADJUST
MUTE
DECODE
DSP DSP
RETURN
STEREO
1 3
2
4 6
5
7 9
8
OSD/MENU
0
DISP ENT
MI M2 M3
RNC-510
Notes :
• The digital re-mastering function does affect on the front left and right signals only.
However, it does not affect on the digital signals that are output from the DIGITAL OUTs of this unit.
• When the stereo mode or the pure audio function is selected while playing analog stereo sources, the digital re-
mastering function cannot be activated.
• Each time these buttons are pressed, the digital re-
mastering mode changes as follows:
On : Select this to process the input signal digitally and to
convert its sampling frequency to 192 kHz for an
more detailed sound reproduction.
Off : Select this to cancel the digital re-mastering function.
56