Sherwood Newcastle P-965 Operating Instructions Manual page 11

9. CONNECTING MULTI-ROOM SYSTEM KIT
• The multi-room system kit(sold separately ) is essential for operation from a remote location .
For information on the multi-room system kit, contact the Xantech corporation at 1-800-843-5465 or www.xantech.com.
• IR IN jacks allow you to control this unit from another room with the remote control unit.
• To control this unit from another room with the remote control unit, connect the IR IN 1 or 2 jack to the output of the
connecting block.
• If this unit is located inside a cabinet or other enclosure where the infrared beams from the remote control unit cannot enter,
then operation with the remote control unit will not be possible. In such a case, connect the IR IN 1 or 2 jack to the output of
the connecting block.
• To control other compatible component from another room with the universal remote control unit, connect the IR OUT jack to
the IR emitter.
Main room
IN1 IN2
OUT
IR
This unit
MUL MULTI CONTROL TI CONTROL MASTER VOLUME MASTER VOLUME
INPUT SELECTOR
POWER
STANDBY DECODING STEREO DIGITAL/ANALOG PURE AUDIO VIDEO AUDIO T.MON 8CH DIRECT
ON/ OFF
W R A S
WIDE RANGE AMPLIFIER STAGE A/V TUNER AMPLIFIER P A/V TUNER AMPLIFIER P-965
• When this unit is located inside a cabinet.
In the cabinet
IN1 IN2
OUT
IR
MUL MULTI CONTROL TI CONTROL
POWER
STANDBY DECODING STEREO DIGITAL/ANALOG PURE AUDIO
ON/ OFF
W R A S
WIDE RANGE AMPLIFIER STAGE
Connecting block
(Multi-room system kit)
output
DVD player
-965
IR emitter
(Multi-room system kit)
This unit
MASTER VOLUME MASTER VOLUME
INPUT SELECTOR
VIDEO AUDIO T.MON 8CH DIRECT
A/V TUNER AMPLIFIER P-965 A/V TUNER AMPLIFIER P -965
Another room(Room 2)
IR receiver
(Multi-room system kit)
output
Connecting block
(Multi-room system kit)
11
IR receiver
(Multi-room system kit)