Surround Sound - Sherwood Newcastle P-965 Operating Instructions Manual

When CD, AUX or VIDEO 1~ VIDEO 6 is
selected
Select the digital or the analog input as
4
desired.
STANDBY
DIGITAL/ANALOG
or
• Each time this button is pressed, the corresponding
input is selected as follows:
DIGITAL ANALOG
• When PHONO, TUNER or TAPE MONITOR is
selected as an input source, the analog input is
automatically selected.
Notes:
• When the selected digital input is not connected,
"DIGITAL" is flickering, meaning no sound.(Refer
to "ENJOYING SURROUND SOUND" on page
28.)
• To select the digital input, you should assign the
connected DIGITAL IN to the corresponding input
source. (For details, refer to "When selecting the
DIGITAL INPUT SETUP" on page 51.)
Operate the selected component for
5
playback.
• When playing back the program sources with
surround sound, refer to "ENJOYING SURROUND
SOUND" on page 28.
Adjust the (overall) volume.
6
MASTER VOLUME
or
DOWN
UP
POWER ON
AUD2
SLEEP D/A
DIMM S.A/B
ROOM2 SUR.B
T.TON PURE
OSD PARA.
PAGE1
STANDBY POWER ON
MAIN
CH.
SET
VOL CH/
VOL
ADJUST
MUTE
DECODE
DSP DSP
RETURN
STEREO
1 3
2
4 6
5
7 9
8
OSD/MENU
0
DISP ENT
MI M2 M3
RNC-510
23
Adjusting the tone (bass and treble)
Select the tone mode as desired.
7
TONE MODE
• Each time this button is pressed, the tone mode
changes as follows:
BASS TREBLE
• The tone display is shown for several seconds.
• If the tone display disappears, press the TONE
MODE button again.
• ( ) : When the tone defeat function is activated
("DEFEAT ON"), bass and treble modes
cannot be selected
Note:
• When the pure audio function is activated, the tone
mode cannot be selected.
At the desired tone mode, adjust as
8
desired.
MULTI CONTROL
At the tone defeat mode, each time the MULTI
CONTROL knob is rotated, the tone defeat mode
changes as follows:
DEFEAT ON : When listening to a program source
without the tone effect.
DEFEAT OFF : When adjusting the tone for your taste.
At the desired tone (bass or treble), each time the
MULTI CONTROL knob is rotated, the tone level
can be adjusted within the range of +10~ -10 dB.
• In general, we recommend the bass and treble to be
adjusted to 0(flat) level.
• To complete tone adjustment, repeat the above steps
and .
• Extreme settings at high volume may damage your
speakers.
DEFEAT OFF(or ON)