Sherwood Newcastle P-965 Operating Instructions Manual page 30

Listening in a Dolby Virtual Speaker mode
• This mode creates a virtual surround sound field using as few as two front speakers, allowing you to experience
listening from 5.1 channel speakers.
Note : Before using Dolby Virtual Speaker function, first set the speaker layout and virtualization mode as
desired.(For details, "When selecting the VIRTUAL SPEAKER SETUP" on page 48.)
• While playing in a surround mode,
or
Listening in a Dolby Headphone mode
• The Dolby Headphone function simulates 5.1 channel surround sound, which allows you to enjoy 5.1 channel
surround sound through 2 channel headphones, just like listening from 5.1 channel speakers.
Note : Only when the HEADPHONE SELECTOR button is set to the speaker off mode, the Dolby Headphone
mode can be selected.
• While listening with headphones, select the desired Dolby Headphone mode.
POWER ON
STANDBY
MAIN
CH.
SET
CH/
VOL
ADJUST
MUTE
DECODE
DSP DSP
or
RETURN
STEREO
1 3
2
4 6
5
7 9
8
OSD/MENU
0
DISP ENT
MI M2 M3
RNC-510
Selecting the surround back channel mode as connected
• You can set the surround back channel mode according to surround back speaker connection.
POWER ON
STANDBY
AUD2
SLEEP D/A
DIMM S.A/B
ROOM2 SUR.B
T.TON PURE
OSD PARA.
PAGE1
Note:
• When the surround speaker is set to "None", the surround back channel is automatically set to None.
• "DOLBY VS ~" is displayed and combined with the original
STANDBY POWER ON
surround mode, this mode is activated.
• To cancel the Dolby Virtual Speaker mode, press this button again.
MAIN
CH. Then it returns to the previous mode.
SET
CH/
VOL
ADJUST
MUTE
DECODE
DSP DSP
• The desired mode can be selected with pressing the CURSOR LEFT
RETURN
STEREO ( ) button only when the OSD menu operation is not performed.
1 3
2
4 6
5
7 9
8
OSD/MENU
0
DISP ENT
MI M2 M3
RNC-510
• Each time this button is pressed, the mode changes as follows :
DOLBY HEADPHONE 1: This simulates the soundfield as if you were in
DOLBY HEADPHONE 2: This simulates the soundfield as if you were in
DOLBY HEADPHONE 3: This simulates the soundfield as if you were in
Off : It returns to the previous mode.
In case of playing the digital signals from DTS, Dolby Digital or
MPEG sources, it will enter the 2CH downmix mode.
• In case of playing in a surround mode before using headphones,
combined with the original surround mode, the selected Dolby
Headphone mode is activated.
• The desired mode can be selected with pressing the CURSOR UP( )
button only when the OSD menu operation is not performed.
• Each time this button is pressed, the mode changes as follows :
1 channel : When a surround back speaker is connected.
2 channel : When two surround back speakers are connected.
None : When surround back speakers are not connected.
30
a relatively small room with less
reverberations.
a typical listening room with moderate
reverberations.
a large space like theater.