Room 2 Remote Controls; Remote Control Operation Range; Lading Batteries - Sherwood Newcastle P-965 Operating Instructions Manual

ROOM 2 Remote Controls

This remote control unit is an additional remote control unit for the ROOM 2 source playback only.
• You can use the ROOM 2 functions with this remote control unit more conveniently in another room than with the universal
remote control unit.
ROOM2
PHONO CD TUNER
AUX
AUDIO
VIDEO 1 VIDEO 2 VIDEO 3
VIDEO 4 VIDEO 5 VIDEO 6
MUTE
VOLUME
ROOM 2 BUTTON
Each time this button is pressed,
the ROOM 2 function is activated or
canceled.
ROOM 2 INPUT SELECTOR
BUTTONS
When one of these buttons is pressed,
the corresponding input source is
selected.
MUTE BUTTON
Mutes the sound of the ROOM2 source.
•To resume the previous sound level,
press it again.
VOLUME UP/DOWN( )
BUTTONS
Adjust the sound volume of the
ROOM 2 source.

REMOTE CONTROL OPERATION RANGE

• Aim the ROOM 2 remote control(or the
universal remote control) at the IR receiver
installed in another room.(For details, refer to
"CONNECTING MULTI-ROOM SYSTEM
KIT" on page 11.)
Another room(Room 2)
To main room
IR receiver
(Multi-room system kit)
• When you operate the ROOM 2 function in the
main room, aim the universal remote control(or
the ROOM 2 remote control) at the remote
sensor of this unit.
LOADING BATTERIES
Remove the cover.
1
Load two batteries ("AAA" size, 1.5V )
2
matching the polarity.
21