Front & Rear Panel Information; Front Panel Controls; Rear Panel Connections - Sherwood AX-50 Operating Instructions Manual

FRONT & REAR PANEL

Front Panel Controls:

1. ON/OFF: Press to turn the unit either into ON or STAND.
2. SOURCE: Press to select input source (BT, DIGITAL, CD,
BD/DVD, TUNER, PHONO, LINE IN)
TO USE BT/ DIGITAL:
Optical : LED - Orange color Coaxial : LED - Green color BT :
LED - Red color
3. VOLUME: Controls the volume level of all audio chan-
nels.
4. BALANCE: Use to dial to balance the speaker level from
Left to Right
5. TREBLE: Use this dial for Treble adjustment

Rear Panel Connections:

1. ANALOGUE INPUTS: PHONO, CD, BD/DVD, TUNER
2. REC OUT: This analog audio output is for connecting a
recorder with an analog audio input
3. SUB OUT: This is for connecting an Active Subwoofer
4. SPEAKER TERMINAL SET A: These terminal posts are for
connecting L/R speakers for Speaker Set A (maximum 1 Pair
5. Coaxial Digital: These coaxial digital audio inputs are for
connecting components with coaxial digital audio out puts,
such as CD and BD/DVD players
6. Optical Digital: These optical digital audio inputs are for
connecting components with optical digital audio outputs,
such as CD and DVD/BD players
6. BASS: Use this dial for Bass adjustment
7. LINE IN: Use to connect LINE IN device
8. TONE DIRECT: Press to select TONE DIRECT mode
9. SPEAKER A/B: Use to select speaker A/B
Speaker A: LED - Green colour
Speaker B: LED - Red colour
Speaker A+B: LED - Orange colour
None: LED - Off
10. REMOTE SENSOR: Aim Remote Control at this
11. PHONES: Outputs audio signals for private listening
with headphones
7. BLUETOOTH: The Units Bluetooth module (Non Re-
movable)
8. 115/230V: This switch is used to select between 115V
or 230V. FOR AUSTRALIAN AND NEW ZEALAND CUS-
TOMERS - DO NOT CHANGE FROM THE DEFAULT 230V
POSITION
9. AC OUTLET: Socket for connecting the supplied IEC
Mains Power Cord for connection to mains power
10. USB UPGRADE: For connection to a PC for upgrad-
ing the units Firmware - For Authorized Service Personnel
use only
11. SPEAKER TERMINAL SET B: These terminal posts are
for connecting L/R speakers for Speaker Set B (maximum
1 Pair)
7