Correcting Browser Errors After Firmware Flashes; Table 8 - V3X Mms Capabilities On Cingular - Motorola RAZR MAXX Personalization Manual

Mobile phone
Hide thumbs Also See for RAZR MAXX:
Table of Contents

Advertisement

Motorola Razr V3x Personalization Guide (MoGu V3xPG) V2.5
[ebentley] @alsitin: I've tried it with zeroes in all thre
that way right now. I just did a quick tutorial (MS Word file and flash file) on changing those settings. So, if I'm telling
people something wrong, please let me know so I can change the tutorials.
[EDIT]: Just checked my SMS send capability and alsitn is right (as usual
prevents you from sending SMS messages. When you try to send, you get a message that says "you've exceeded f
limit". I just set it back to 1MB and
Settings>Video Camera>Options>Video Camera Setup
Auto Repeat: Off
Full Screen: Left (90 CCW)
Spatial Audio: On
Spatial Width Control: 7
Bass Boots: On
Bass Boost Level: 7
Video Quality: Best
Video Length: Maximum (this will allow you to capture video for as long as you
have space on your card)
Basically, here's what I know about the V3x's MMS video capabilities operating on the Cingular network in
the US:

Table 8 - V3x MMS Capabilities on Cingular

V3x Capability
Send MMS containing video attachment
-To another video capable handset
-To a mobile email account
-To a non-mobile email account
Receive Video attachment in MMS from
another handset
Receive Video attachment in email sent to my
mobile email account
XXXXXXXXXX@mobile.m
1.28

Correcting Browser Errors after Firmware Flashes

Sometimes, after flashing with new firmware, the browser has a hard time displaying proper graphics and text. Here'
what you need to do to correct this problem.
Problem: [Sh
iggy822]: Hi guys.
I recently Flashed my firmware from 3 (AUS) to the l
w ole page coming up with square character sy
h
br wser settings, I have deleted the web sessions file from /a/ and set it up again etc. I have also reflashed my phone
o
with the same generic firmware, but still getting the same output. I'm thinking about flashing back to a 3 (Australia)
firmware if there's no way around this.
V3X Personalization Guide-V2-5-eb-v1-061205.doc
ebentley
(Volume 1 - Primary Mods)
it now works fine. I'll correct the tutorials and re-post. [End Edit].
ycingular.com
e boxes without any difficulty. In fact, both of my V3x(s) are set
On Cingular
Yes
Yes: Receive MMS text
No
- not the video
attachment
Yes: Receive MMS text
No
- not the video
attachment
atest generic firmware. The symptoms I am getting are, the
mbols instead of the usual graphics and text. I have the correct
) Setting the SMS size to zero (0)
Result/Message
Successful
"One or more of the message
components have been deleted by
MMS Adaptation. Either the
message was too large or the
componen
ts were unsuitable for your
terminal."
Unsuccessful
ile
65 of 227

Advertisement

Table of Contents
loading

Table of Contents