Table of Contents
Advertisement
Motorola Razr V3x Personalization Guide (MoGu V3xPG) V2.5
No
w that that's done, open the
pan
el that's highlighted. In this
So
, the value "30" is currently s
scr
een it says "Adr. hex: 1D
offs
e
t address decreases, move to the right and it increases in
your mouse or use your arrow keys of do it the easy way and go to the top menu and click address>go to. Then type in the
address and
XVI32 will go to that specific address. You can verify the address on the bottom of the sc
Go
to the tool bar menu. Click "Tools"
V3X Personalization Guide-V2-5-eb-v1-061205.doc
ebentley
(Volume 1 - Primary Mods)
SEEM "0032_0001" that you just saved. In this screen shot, look at the value in the white
case the number "30" is seen in blue. This is the actual offset location that must be edited.
tored in offset "1D". How do we know that this is offset "1D"? Notice at the bottom of the
". This will change based on what offset square you are highlighting. Move to the left and the
and then "Bit manipulation...".
number. To navigate around to other offsets either click with
reen.
155 of 227
Advertisement
Table of Contents
