Table of Contents
Advertisement
Motorola Razr V3x Personalization Guide (MoGu V3xPG) V2.5
Troubleshooting:
•
I can't get P2Kman to recognize my phone.
Did all the drivers install properly?
o
Did you try restarting your phone and trying it again?
o
Did you try restarting your computer and trying it again?
o
What type of USB cable are you using? I hope it's a Motorola OEM one.
o
Did you install MPT first? Is the phone reco
o
Is the phone recognized as "Motorola USB Modem" when you first plug it in?
o
Does Windows recognize that there is any type of USB device plugged in? Check the device manager.
o
Did you try installing PST? That sometimes works. I can't tell you where to get it, though, as it's not
o
freeware.
Have you tried manually installing the drivers? Go to Control Panel > Add New Hardware > Select
o
from List > Have Disk and point to drv/p2k.inf in the P2Kman folder.
•
I uploaded my edited gain_table.bin to my phone and I d
Did you change the correct offset?
o
Was the value you changed the offset
o
Did you save the gain_table.bin before you uploaded it?
o
Did
you set the upload path on P2Kman to "/a/"?
o
Did you use the "PC >>> Phone" button? (Don't use the "Upload seem" button!)
o
Did you restart your phone?
o
•
I uploaded the seem to my phone and I don't notice a
Did you change the correct bit of the correct o
o
Did you save the seem before you uploaded it?
o
Did you enter the correct seem and record number in P2Kman properly?
o
Did you use the "Upload seem" bu
o
Did you restart your phone?
o
Was your change Engineering, AIM, IM, Mobile QQ, Videos, Bluetooth, or Quick Menu?
o
Frequently
Asked Questions:
•
When I have my bluetooth headset paired with my phone, it uses a default ringtone instead of my
custom one. How do I get it to use my custom ringtone? You can't. Sorry. That's a Motorola bug.
•
I enabled advanced network menus, but manual network selection doesn't show up. How do I enable
it? Adjust seem 0032, offset 02, bit 1. Unfortunately, this will likely cause your voicemail indicator to act up and
you will receive text messages from ^@ and _@ whenever you get a voicemail or check it.
•
I keep getting wierd text messages from ^@ and _@ and/or my voicemail indicator is always on. How
do I fix this? Adju
network selection.
•
How do I unbrand my phone without flexing? It's not difficult. First, you'll probably want to set the oute
LCD to the Motorola icon instead of the custom text, turn the custom startup/shutdown animations off in favor
of the Motorola OEM ones, and turn off the custom startup/shutdown sounds. Now,
th
ose pesky branded menus. You'll need to repla
(V
300/400/500/600) use these
files have all menus in them and no branding. Back up your original mma files and upload these new ones to
/a/system/ using P2Kman. Reset the file attribute on mma_dcp to "4" ... the attribute for mma_ucp stays "0".
Next (back it up first) delete the file /a/DL_DB_INET_RECORDS if it is on your phone. This file contains the
"Shop Ringtones," "Shop Graphics," and "Shop Games & Apps" menus that show up in various places. Finally,
(back it up first) replace /a/mib_op_greet with the
V3X Personalization Guide-V2-5-eb-v1-061205.doc
ebentley
(Volume 1 - Primary Mods)
If so, did you check your mma_ucp and mma_dcp files? See the section "Activating Menu
Items for Special Features" for more info.
st seem 0032, offset 02, bit 1. Unfortunately, this will likely cause you to lose manual
Vxxx mma
gnized using that software?
on't notice any difference.
to between 00 and 08?
ny difference.
ffset?
tton? (Don't use the "PC >>> Phone" button!)
ce your mma files. If you have a TRIPLETS phone
files. If you have a V551, use these
Motorola OEM one
we need to remove all
V551 mma
files. These mma
so that when you startup the WAP
r
148 of 227
Advertisement
Table of Contents
