Table of Contents
Advertisement
Motorola Razr V3x Personalization Guide (MoGu V3xPG) V2.5
First, here's a link to a tutorial for getting connected:
1.1.4
Automated Method for Installing P2K Drivers (New Method for Installing P2K Drivers)
P2K driver installation has always been a pain - often involving searching Google for warez.
Now, there is a much simpler method - go to
and JAL Enabler Tool for Motorola OS Products Version 2.0
•
Extract the install file from the .zip file
•
Follow the installation instructions
•
Start from section 3.2 for the software install instructions and section 4.2 for the driver installation
•
This works on Windows XP and 2000
1.1.5
P2K Driver Installation and Troubleshooting Guide
If you have problems connecting the tools to the phone, here's a tutorial to help you work through them:
http://www.filelodge.com/files/room31/857629/Guides_tutorials/P2K_Driver_Troubleshooting.swf.
meantime, ask yourself these questions:
1. What order did you load the tools? Usually you load the Motorola Phone tools (MPT) first, P2K Commander or
P2K Manager next (these will load the P2K 2.9 drivers), then RSD Lite 3.0.
2. Did you have any problems installing P2K Commander or P2K Manager?
3. Connect your phone directly to the computer—NOT through a USB hub!
Do these things:
1. With the phone plugged directly into your computer NOT through a USB hub: On your computer, go to control
panel>system>device manager>hardware. Open the entry entitled modems. Do you see an entry of "Motorola
USB Modem"?
2. If that entry is there, right click on it and select "properties". Look in the "Device Status" box and if installed
properly, you should see "This device is working properly. If you are having problems with this device, click
Troubleshoot to start the troubleshooter". If not installed properly, click on the "Driver" tab at the top of the
window.
3. Now Click Update
4. click the "no, not at this time" radio button
5. click next
6. click "install from a list or specific location (Advanced)" radio button and ,a search and installation window will
open
7. click "include this location in the search radio button
8. Browse to the folder that contains the P2k drivers
9. Click Next. The system will take a couple of seconds to look for the drivers in the location you chose. Then, it will
probably ask you to point to the P2K.sys file so browse to the location of that file (wherever the P2K drivers are
located on your computer, usually in a sub directory to P2KCommander/p2kdrivers_2.9 or P2K Manager/drv) and
click on it. You'll have to point to P2K.sys file 4 times--1 each for:
a. Motorola Accessories (Loaded via MPT)
b. Accessories Interface
c. Data Logger MCU Interface, and
d. Test Command Interface.
V3X Personalization Guide-V2-5-eb-v1-061205.doc
ebentley
(Volume 1– Primary Mods)
http://earlbentley.net/Download.html
Motodev downloads page
here
and download the bottom file titled: UID, KDWP
In the
5 of 227
Advertisement
Table of Contents
