Nmea Output Setup; Figure 2-219: Nmea Output Setup Page - BENDIXKing AV80R User Manual

Honeywell Bendix/King AV8OR Handheld User's Guide
Tap the PREV PAGE soft key to return to the System Status Menu.

NMEA OUTPUT SETUP

The NMEA interface is a standard that was developed to allow data
communication
equipment and communications equipment.
The NMEA standard uses a simple ASCII, serial communications
protocol that defines how data is transmitted in a "sentence" from
one "talker" to one "listener" at a time.
AV8OR outputs a user selectable subset of the most common
navigation NMEA sentences through the RS-232 port on the mini-
USB port when configured properly.
The NMEA sentences supplied by AV8OR may not be the
correct sentences for the all equipment that can receive
NMEA sentences.
Even though NMEA outputs are intended for use with
experimental aircraft only, Bendix King is not responsible for
the correct operation of equipment that receives the NMEA
output from AV8OR.
The NMEA Output Setup page permits the NMEA setup options to
be configured, as shown in the figure below.

Figure 2-219: NMEA Output Setup Page

When using the NMEA output to talk to another device, refer to the
user guide for the device for the correct NMEA setup.
System Setup Function
Page 2-168
© Honeywell International Inc. Do not copy without express permission of Honeywell
between electronic
CAUTION
instruments,
D200803000008
Rev 5 Mar 2012
navigation