Figure 2-45: Map - Airport Filter - BENDIXKing AV80R User Manual

Honeywell Bendix/King AV8OR Handheld User's Guide
position directly to the selected airport. The new Direct-To course is
displayed on the map.
Tap the AIRPORT FILTER soft key to configure the airport filter by
setting the minimum runway length and surface requirements. The
filter will not allow airports below the minimum requirements to be
displayed in the list.
Double tap on the Minimum length selection to display a numeric
keypad to enter the minimum length.
minimum runway length will be rounded to the nearest hundred feet.
Double tap on the Required surface selection to select the type of
surface for the airports you want to filter.
Any or Hard Only can be selected for the required runway surface.
Tap the DONE soft key to accept the changes.
Only airports that match the filter conditions will now show in the
Nearest Airports window.
VFR Moving Map Function
Page 2-40
© Honeywell International Inc. Do not copy without express permission of Honeywell
Figure 2-45: Map – Airport Filter
The
D200803000008
Rev 5 Mar 2012