Nmea Output Setup - BENDIXKing AV80R User Manual

Hide thumbs Also See for AV80R:
Table of Contents

Advertisement

AV8OR User's Guide
System Setup Function
Figure 3-173: System Setup - Weather Status Page
The weather radio's serial number and service level are displayed
along with the bit error rates. The communication Status is
displayed showing when valid data is being received.

NMEA Output Setup

The NMEA interface is a standard that was developed to allow data
communication
equipment and communications equipment.
The NMEA standard uses a simple ASCII,
protocol that defines how data is transmitted in a "sentence" from
one "talker" to one "listener" at a time.
AV8OR outputs a user selectable subset of the most common
navigation NMEA sentences through the RS-232 port on the mini-
USB port when configured properly.
The NMEA sentences supplied by AV8OR may not be the
correct sentences for the all equipment that can receive
NMEA sentences.
Even though NMEA outputs are intended for use with
experimental aircraft only, Bendix King is not responsible for
the correct operation of equipment that receives the NMEA
output from AV8OR.
Pub. No D200803000008
© Honeywell International Inc. Do not copy without express permission of
between
electronic
CAUTION
Page 3-136
Honeywell.
Aviation Mode Operation
instruments,
serial communications
Rev 2 Dec 2008.
navigation

Advertisement

Table of Contents
loading

Table of Contents