Turning Av8Or On/Off; Figure 1-6: Av8Or Power Up - BENDIXKing AV80R User Manual

Honeywell Bendix/King AV8OR Handheld User's Guide
Pan: Touch the screen and move your finger or stylus across the
screen while continuing to touch the screen. This allows you to scroll
the map and change settings.
Highlight: Touch on the screen to select the desired individual
fields. Moving the highlight to a desired location allows the user to
make a selection, begin data entry, or scroll through a list.
Field: The location on a page where data or an option can be
entered and shown.
Scroll Bar: When viewing a list of items that is too long to show on
the screen, a scroll bar appears along the right side of the list. To
scroll through a list, hold your finger or stylus on the scroll bar and
move your finger or stylus up or down and the list of items will move
up or down too.

Turning AV8OR on/off

The first time your new AV8OR is turned on, the GPS receiver must
collect satellite data and establish its present location. Before you
turn on the unit, make sure that it has a clear and unobstructed view
of the sky to receive satellite signals.
1. Ensure that the "Lock" switch is unlocked.
2. Hold the Power Key down until the blue screen shows.

Figure 1-6: AV8OR Power Up

3. To turn off the AV8OR, press and hold the Power Key until
POWER OFF screen shows.
D200803000008 Getting Started
Rev 5 Mar 2012 Page 1-9
© Honeywell International Inc. Do not copy without express permission of Honeywell