Camera Directions - BENDIXKing AV80R User Manual

Symbol Type
Section
control
Red light

CAMERA DIRECTIONS

A speed camera can measure the speed of one direction of the
traffic, both directions, or even several directions in an intersection,
when they are mounted on a rotating base. The same directions
apply to red light cameras. GoDrive warns you only if you drive in a
measured or possibly measured direction. The measured direction of
D200803000008
Rev 5 Mar 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell
Honeywell Bendix/King AV8OR Handheld User's Guide
Description
the fixed speed cameras.
These speed cameras work in pairs, and do
not measure your current speed but your
average speed between the two speed
cameras. Both identify your car and record
the exact time you pass them. They use the
difference between the two points in time to
calculate your average speed. GoDrive
warns you when you approach one of these
speed cameras, but as you pass by, the
warning stays on, and your average speed
is measured until you reach another speed
camera of this type. If your average speed
exceeds the speed limit between the two
speed cameras, you receive the same
special warning sound as with the other
speed camera types. In the rare case
GoDrive cannot register the moment you
pass the second
example, it is placed at the exit of a tunnel
where GPS position is not yet available) the
warning continues. Just tap the speed
camera symbol displayed on the screen to
stop the warning.
These cameras check if you obey traffic
lights. The warning is similar to mobile
speed cameras: as there is no speed limit
given, only the proximity is announced.
speed camera
Automotive Mode Operation
Page 3-35
(for