Figure 2-6: Demo Mode - BENDIXKing AV80R User Manual

Honeywell Bendix/King AV8OR Handheld User's Guide
The user can
bendixking.com/av8or to see if a newer version of the software or
database is available.
If the OK soft key is pushed to acknowledge the Jeppesen database,
the Aviation Map page is displayed, as shown in Figure 2-7: Map
Page.
Figure 2-7If the DEMO MODE soft key is tapped, then AV8OR will
enter a simulation mode.
DEMO MODE
Demo Mode lets the user become familiar with handling the AV8OR
system on the ground by running in a simulation mode. When the
AV8OR is in Demo Mode, it performs the same as when it is
receiving valid sensor signals to use the various functions. Demo
Mode can only be activated on the final title page during startup, as
shown in
Figure 2-5. After tapping the DEMO MODE soft key, the simulator
shows a caution page which must be acknowledged before
continuing, as shown in the figure below.
Tap the OK soft key to acknowledge the caution and then the Map
page is displayed.
Basic Operation
Page 2-4
© Honeywell International Inc. Do not copy without express permission of Honeywell
browse the

Figure 2-6: Demo Mode

Bendix/King web page at
D200803000008
Rev 5 Mar 2012