Route Navigation; Selecting The Destination Of A Route - BENDIXKing AV80R User Manual

Honeywell Bendix/King AV8OR Handheld User's Guide
Shutdown: If AV8OR is disconnected from an external power
source, AV8OR will automatically shut down after a set number of
seconds unless you tap the Cancel soft key.

ROUTE NAVIGATION

You can set up your route in GoDrive in several ways:
if you need a simple route (a route with only one destination, without
any intermediate via points), you can select the destination and start
navigating to it right away
you can plan a multi-point route (available in Advanced mode only)
you can also plan a route independently of your current GPS position
or even without GPS reception (available in Advanced mode only)

Selecting the Destination of a Route

GoDrive offers you several ways of choosing your destination and
via points (intermediate destinations):
•
Use the selected location on the map.
•
Enter a full address or a part of an address, for example a street
name without a house number or the names of two intersecting
streets.
•
Enter an address with postal code. This way you do not need to
select the name of the settlement and the search for street
names might be faster as well.
•
Use a coordinate.
•
Use a saved location:
A Favorite
o
A POI
o
The History of previously set destinations and waypoints.
o
Tip!
If you are going to use a route later, save it before you start
navigating. Tap the following soft Keys:
Automotive Mode Operation
Page 3-38
© Honeywell International Inc. Do not copy without express permission of Honeywell
, ,
D200803000008
Rev 5 Mar 2012