Wxworx Xm Weather Receiver Bluetooth Setup; Figure 6-6: Wxworx Bluetooth Receiver Setup - BENDIXKing AV80R User Manual

Honeywell Bendix/King AV8OR Handheld User's Guide

WxWorx XM Weather Receiver Bluetooth Setup

To configure the AV8OR to receive weather data from the Bluetooth
version of the WxWorx XM Weather Receiver, perform the following
steps:
Setup the WxWorx receiver in the Device and Port Setup page as
follows:
1. On the Main Menu page, tap the
Aviation mode navigation program.
2. From the Map page, tap on the MAIN MENU soft key to go to
the Aviation Main Menu.
3. Tap the
4. Highlight the Device Setup option and tap the SELECT soft key
to show the Device and Port Setup page.
5. Set the Weather Port to BlueTooth.
6. Set the Weather Type to "WxWorx". When finished the Device
and Port Setup page should look like in Figure 6-6.

Figure 6-6: WxWorx Bluetooth Receiver Setup

Establish a paired connection between the WxWorx XM receiver and
the AV8OR.as follows:
Appendix
Page 6-12
© Honeywell International Inc. Do not copy without express permission of Honeywell
soft key to open the System Setup Menu.
soft key to start the
D200803000008
Rev 5 Mar 2012