ADEMCO Vista-20P User Manual page 42

THIS SECTION APPLIES ONLY TO RESIDENTIAL SYSTEMS
Manually
Initiating
a Fire Alarm
Using the Panic
Key(s) Assigned
Emergency
– 42 –
Technical Manuals Online! - http://www.tech-man.com
1. Should you become aware of a fire emergency before your smoke or
heat detectors sense the problem, go to your nearest keypad and
manually initiate an alarm by pressing the panic key assigned for
FIRE emergency for 2 seconds. If a key pair has been assigned for
fire, press both keys at the same time. See the Using the Panic Keys
section below for further details.
2. Evacuate all occupants from the premises.
3. If flames and/or smoke are present, leave the premises and notify
your local Fire Department immediately.
4. If no flames or smoke are apparent, investigate the cause of the
alarm. The zone number(s) of the zone(s) in an alarm condition will
be displayed at the keypad.
A key or key pair may have been assigned for manually initiating a
FIRE alarm. See the Panic Keys section for key assignments.
for FIRE
For convenience, indicate the key or key pair assigned for fire below.
In divi dua l Ke ys
A B
seconds.
O R
Key Pai rs
1
O F F
R E A D Y
3
S T A Y
DISPLAYS FOLLOWING MANUAL INITIATION OF A FIRE ALARM
ALPHA DISPLAY KEYPAD
C
Press
the individual key assigned for fire
and
R E A D Y
#
and
#
and
FIXED-WORD KEYPAD
for 2
Press
the key pair assigned
at the same time.
for fire
AC
ALARM
FIRE