Chime Mode; Quick Bypass - ADEMCO Vista-20P User Manual

If programmed, "Quick Bypass" allows you to easily bypass all open (faulted) zones
without having to enter zone numbers individually. This feature is useful if, for
example, you routinely leave certain windows open when arming at night.
1.
2. Wait for all bypassed zones to be displayed, then arm
Ask your installer if "Quick Bypass" is active for your system, and if so, check here:
CHIME mode alerts you to the opening of a perimeter door or window while the
system is disarmed.
When Chime mode is activated:
To turn Chime Mode on:
To turn Chime Mode off:
The CHIME message will disappear.
– 20 –
Technical Manuals Online! - http://www.tech-man.com
+ 6 + [#]
(Security Code)
BYPASS
In a few moments, all open zones will be displayed
and automatically bypassed.
zones that you wish to leave unprotected are bypassed, and
that there are no other zones unintentionally left open.
the system as desired.
• Three tones sound at the keypad whenever a perimeter door or window is opened.
• Interior zones do not produce a tone when they are faulted.
• Pressing the READY key will display the open protection points.
• Chime mode can be used only while the system is disarmed.
+ 9
(Security Code)
CHIME
The CHIME message will appear. Perimeter zones
will cause a tone when faulted.
+ 9 again
(Security Code)
CHIME
Make sure that only those
Alpha Display:
(-7%61)(  46)77
 83 7,3; *%9087
Fixed-Word Display: NOT READY
Alpha Display:
(-7%61)( &=4%77
6)%(= 83 %61
Fixed-Word Display: BYPASS
Alpha Display:
(-7%61)(
6)%(= 83 %61
Fixed-Word Display: READY
Alpha Display:
(-7%61)( ',-1)
6)%(= 83 %61
Fixed-Word Display: CHIME