ADEMCO Vista-20P User Manual page 34

5. For event number "02," enter the access group
6. For event numbers "03-07," enter the partition
7. Enter the event's start time and days of week.
8. Enter the event's stop time, AM/PM and days of
9. Enter the desired repeat option.
10. Select the randomize option, if desired.
– 34 –
Technical Manuals Online! - http://www.tech-man.com
number. Otherwise, this prompt is skipped.
Press [∗] to continue to the "Start" prompt below.
number to be armed or disarmed.
0 = arm all; 1 = partition 1; 2 = partition 2;
3 = arm common
Otherwise, this prompt is skipped.
Press [∗] to continue to the "Start" prompt.
Hour = 00-23; minute = 00-59
AM = 0; PM = 1
Days = Position the cursor under the desired days
using the [∗] key to move forward, then press "1" to
select the day.
Press [∗] to continue.
week.
Refer to step 7 for available entries.
Press [∗] to continue.
0 = no repeat
1 = repeat schedule weekly
2 = repeat schedule biweekly (every other week)
3 = repeat schedule every third week
4 = repeat schedule every fourth week
e.g., To make a schedule that happens everyday you
would select all days with a repeat count of 1. To
make a schedule that runs for one week then stops,
select everyday with a repeat count of 0.
0 = no; 1 = yes
If selected, the schedule times will vary within 60
minutes of the "hour" time. For example, if a
schedule is set to start at 6:15pm, it will do so the
first time 6:15pm arrives, but on subsequent days it
will start anytime between 6:00 and 6:59 p.m.
Press [∗] to continue.
+6394 291&)6
<
4%68-8-32
<
78%68 718;8*7
,, 11%1 
7834 718;8*7
,, 11%1 
6)4)%8 348-32
 <
6%2(31->)
 = 23  = =)7 <