Zones And Partitions; Arming, Step-Arming And Disarming Burglary Protection; Alarms; Memory Of Alarm - ADEMCO Vista-20P User Manual

Zones and Partitions

Arming, Step-Arming and Disarming Burglary Protection

Alarms

Memory of Alarm

– 6 –
Technical Manuals Online! - http://www.tech-man.com
• The system sensing devices have been assigned to various "zones," which are
specific areas of protection (e.g., front door, kitchen window, etc.).
• Zone numbers are displayed at the keypad when an alarm or trouble condition
occurs on a sensor.
• Partitions (VISTA-20P) provide two independent areas of protection, with each
partition containing a group of zones that can be armed and disarmed without
affecting other zones or users.
• Partitioned systems (VISTA-20P) can include a common zone area, which is an
area shared by users of both partitions (such as a lobby in a building).
• The system must be armed before the burglary protection can sense intrusions.
• To arm your system, enter your user code followed by the desired arming key.
• If programmed, the [#] key can be pressed instead of entering the security code
when arming the system.
• You can also use the step-arming key, if programmed, to arm the system, which
lets you use a function key to arm the system in one of three modes by simply
pressing the key repeatedly.
• To disarm the system, enter your user code then press the [OFF] key.
• When an alarm occurs, both the keypad and external sounders will sound, and
the keypad will display the zone(s) causing the alarm.
• If your system is connected to a Central Monitoring Station, an alarm message
will also be sent.
• To stop the alarm sounding, simply disarm the system.
• When an alarm condition occurs, the keypad displays the number(s) of the
zone(s) that caused the problem, and displays the type of alarm.
• The message remains displayed even after disarming the system, but can be
cleared with another "off" sequence.