Accessing Other Partitions (Vista-20P); Goto Command And Multi-Partition Arming - ADEMCO Vista-20P User Manual

Each keypad is assigned a default partition for display purposes, and will show only
that partition's information.
The following table shows the relationship of the keypads in each partition when
system is armed and disarmed.
Condition 1
Condition 2
Condition 3
Condition 4
When both partitions are disarmed, the keypad in each partition displays zone
status for its partition only. The common zone keypad shows the status in that
zone only. See Condition 1 above.
When partition 1 is disarmed and partition 2 is armed, the keypad in partition 1
shows the status of partition 1 and the common zone. Partition 2 will display the
status of partition 2 only. See Condition 2 above.
When partition 1 is armed and partition 2 is disarmed, the keypad in partition 1
shows the status of partition 1 only. Partition 2 will display the status of partition
2 and the common zone. See Condition 3 above.
As long as any one of the two partitions is disarmed, the common zone will always
be disarmed. The common zone will be armed only when both partition 1 and 2 are
armed. See Condition 4 above.
– 30 –
Technical Manuals Online! - http://www.tech-man.com
• If the user is authorized, a keypad in one partition can be used to perform
system functions in the other partition by using the GOTO command. Refer to
the GOTO section.
• If the user is authorized, that user can arm other partitions. Refer to the Multi-
Partition Arming section.
PARTITION 1
Arming Keypad
State Status
Disarmed Partition 1
Only
Disarmed Partition 1 and
Common Zone
Armed Partition 1
Only
Armed Partition 1
Only
PARTITION 2
Arming Keypad
State Status
Disarmed Partition 2
Only
Armed Partition 2
Only
Disarmed Partition 2 and
Common Zone
Armed Partition 2
Only
COMMON ZONE
(LOBBY, etc.)
Arming Keypad
State Status
Disarmed Common Zone
Only
Disarmed Common Zone
Only
Disarmed Common Zone
Only
Armed Common Zone
Only