Using The Goto Command; Multi-Partition Arming - ADEMCO Vista-20P User Manual

If the user is authorized, a keypad in one partition can be used to perform system
functions in the other partition by using the GOTO command.
1.
2. The keypad remains in the new partition until
Some users can be given Multi-Partition arming ability by being assigned to both
partitions when programming user attributes.
When attempting to arm multi-partitions:
Multi-Partition Arming Commands
Technical Manuals Online! - http://www.tech-man.com
• You must use an Alpha keypad to access another partition.
• Keypads automatically return to their original partition after 2 minutes with
no keypad activity.
+ [∗] + partition number (0,1,2,3)
(Security Code)
0 = return to keypad's original partition.
1 = partition 1; 2 = partition 2; 3 = common zone
The keypad beeps to confirm the partition change.
directed to go to another partition, or until it
automatically returns to the original partition.
The active partition number is displayed in the upper
left portion of screen, if the option is programmed.
• You must use an Alpha keypad.
• The system arms only if all partitions are "ready to arm."
• If any partition is "not ready," the system does not arm at all.
• You can use the GOTO command to bypass open zones before arming.
• If any partition is already armed when global arming is attempted, that
partition remains in its existing armed state.
+ [0] + arm command (see list below)
(Security Code)
2 = arms all partitions AWAY
3 = arms all partitions STAY
33 = arms all partitions NIGHT-STAY
4 = arms all partitions MAXIMUM
7 = arms all partitions INSTANT
1 = disarms all partitions
Alpha Display:
 (-7%61)(
6)%(= 83 %61
Fixed-Word Display: Green LED lit
Alpha Display:
 (-7%61)(
6)%(= 83 %61
Fixed-Word Display: Green LED lit
Alpha Display:
 (-7%61)(
6)%(= 83 %61
Fixed-Word Display: Green LED lit
– 31 –