Functions Of The Keypads - ADEMCO Vista-20P User Manual

1. DISPLAY WINDOW.
Alpha Display Keypads: 2-line, 32-
character Liquid Crystal Display (LCD)
keypads that display protection point
identification, system status, and messages.
Fixed-Word Display Keypads: Display
protection zone ID and system status
messages using pre-designated words in the
LCD display.
1
2.
OFF
system, silences alarms and audible trouble
indicators, and clears visual display after
problem's correction.
2
3. AWAY
perimeter and interior.
4.
3
STAY
system only. Interior protection is not armed,
allowing movement within premises without
causing an alarm.
5.
5
TEST
sounder if disarmed. Refer to Testing The
System section for test procedures.
6.
6
BYPASS
zones from being monitored by the system.
7.
8
CODE
codes for other users of the system.
9
8. CHIME
When on, the opening of windows or doors
while the system is disarmed will sound 3
beeps at the keypad(s).
– 10 –
Technical Manuals Online! - http://www.tech-man.com
Disarms burglary portion of the
Arms the entire burglary system,
Arms perimeter portion of burglary
Tests the system and alarm
Removes individual protection
Used to assign additional user
Turns CHIME mode on and off.
#
9. This key can be used for "Quick
Arming" of the system without use of a
security code (if programmed).
10. KEYS 0–9: Used to enter your security
code(s) and to perform their associated
system functions after the security code has
been entered.
11. Used to display all open protection
READY
zones.
12. Arms in manner similar to the
7
INSTANT
STAY mode, but without the entry delay
feature. Entering via an entry/exit door will
cause an alarm.
13. Arms the entire burglary system,
4
MAXIMUM
perimeter and interior, but without entry
delay feature. Entering via an entry/exit door
will cause an alarm.
14. FUNCTION KEYS: Keys A, B, C, D may
have been programmed for a variety of
functions, including panic (emergency)
functions. For details, see the Function Keys
section.
15. READY INDICATOR: (GREEN) Lit when
the system is ready to be armed (no faults
present). While the system is disarmed, this
indicator will go on and off as protection
zones are closed and opened.
16. ARMED INDICATOR: (RED) Lit when the
system has been armed.
17. INTERNAL SOUNDER: The built-in
sounder mimics the alarm sounder during
alarms, and will also "beep" during certain
system functions.