Panic Keys; To Active A Panic Function - ADEMCO Vista-20P User Manual

Your system may have been programmed to use special keys to manually activate
emergency (panic) functions as follows:
This Function
Silent Alarm
Audible Alarm
Personal Alarm
Fire Alarm
*All panic functions send signals to the Central Monitoring Station, if connected.

To active a Panic Function:

Press and hold down for at least 2 seconds whichever
lettered key on the keypad has been programmed for
the desired emergency function.
OR
Press both keys of the assigned key pair at the same
time.
ZONE 95
ZONE 99
ZONE 96
See your installer and use the chart provided in the Features Programmed in Your
System section to note the functions that have been programmed for your system.
– 22 –
Technical Manuals Online! - http://www.tech-man.com
Sends this signal*
silent alarm
audible alarm
auxiliary alarm
fire alarm
A
B
1 2
ARMED
OFF AWAY
4 5
READY
MAX TEST
7 8
C
INSTANT CODE
0
READY
D
Lettered Panic Keys
With This Sounding...
no audible alarm or any visual display
indicating that a silent alarm has been
initiated.
a loud, steady alarm at keypad(s) and
at any external sounders that may be
connected.
steady alarm sound at keypad(s), but
not at external bells or sirens.
temporal (pulsing) sound at external
bells and sirens.
ARMED
READY
3 ZONE 95
STAY
6
BYPASS
9
CHIME
#
Panic Key Pairs
Alpha Display:
(-7%61)(
6)%(= 83 %61
Fixed-Word Display: READY
Typical Panic Alpha Display:
%0%61
Fixed-Word Display: 99 and ALARM
PRESS BOTH KEYS
OF DESIRED PAIR
AT THE SAME TIME
1 2 3
OFF AWAY STAY
4 5 6
MAX TEST BYPASS
ZONE 96
7 8 9
INSTANT CODE CHIME
0 #
READY
ZONE 99