Single Button Arming; Step Arming Feature - ADEMCO Vista-20P User Manual

The "A", "B", "C", and/or "D" keys on your keypad may have been programmed for
single-button arming. Note that while it will not be necessary to use a security code
for arming, a security code must always be used to disarm the system.
If Single-Button Arming is programmed:
Before arming, close all perimeter doors and windows.
1. Press and hold the assigned function key for 2
2. The keypad begins beeping and displays the armed
Single-Button "Step" arming may have been programmed into one of the lettered keys
(A, B, C, or D). Check with your installer to see if this has been done in your system.
If Step-Arming is programmed:
– 16 –
Technical Manuals Online! - http://www.tech-man.com
• A function key has been assigned to a specific type of arming: STAY mode,
Night-STAY mode, AWAY mode, or STEP-ARMING (see Step-Arming
paragraph).
• You DO NOT need to enter your user code before pressing the function key
(you always need your user code to DISARM the system).
seconds (no code is required). Function keys are
shown below.
A 1
B 4
7
C
D
*
message. The red ARMED indicator also lights.
• The assigned key provides a choice of three levels of security.
• The selected key can be pressed once, twice, or three times, increasing the level
of security with each press, as follows
Key First Press
Armed-STAY
A, B, C, D
2 3
OFF AWAY STAY
5 6
TEST BYPASS
8 9
INSTANT CODE CHECK
0 #
READY
ADT3000-007-V0
Second Press
Armed Night-STAY
(if programmed)
Alpha Display:
(-7%61)(
6)%(= 83 %61
Fixed-Word Display: Green LED lit
Alpha Display:
%61)(%;%=
=39 1%= )<-8 23;
Fixed-Word Display: AWAY
Third Press
Armed-AWAY