Engine Oil Replacement - KYMCO MYROAD 700i Owner's Manual

3. After a few minutes. The oil level should be
between the upper(H) and lower(L) marks on
the oil inspection screen.
4. If required, remove the oil filler cap and add the
specified oil so the oil level touches the upper
level mark on the screen. Do not overfill.
5. Reinstall the oil filler cap
WARNING
4
The engine and related components can
become very hot. Use care when inspecting the
oil level so you would not burn yourself. If
needed, let the engine and exhaust system cool
before working in those areas.

Engine oil replacement

Engine oil quality is the primary factor that affects
engine longevity. Change your scooter's engine oil
as specified in the maintenance schedule .
41
MAINTENANCE
NOTE: Change the engine oil with the engine at
normal operating temperature and the scooter on
its center stand to assure complete and rapid
draining.
. Check for oil leaks.
1. Remove the oil filler cap
crankcase cover.
2.
Place a suitable container (drain pan) under the
left crankcase.
from the right