KYMCO MYROAD 700i Owner's Manual page 17

CONTROLS & FEATURES
( 9) Seat unlock indicator "MET-IN"
Lights when the seat is not locked completely.
(10) Side stand down indicator
Lights when side stand touch the ground.
(11) High beam indicator
Lights when the headlight high beam is turned
on.
(12) Cell phone socket indicator
Lights when the cell phone socket is used.
(13) Coolant temperature gauge
It indicates engine coolant temperature when
the main switch is in the "
(14) Button "ADJ"
The button is used to correct time and select
the trip meter, the odometer or reset trip meter.
(15) Clock
Shows hour and minute.
(16) Button "MODE"
The button is used to
(km or mile)
(17) Oil service indicator
If the oil service indicator keep lighting while
riding, it indicates that the engine oil should be
changed at each maintenance interval.
NOTE:
When finish changing engine oil, keep pressing
MODE and ADJ buttons at the same time until
" position.
the indicator is off.
shift the unit of speed
.
2
13