Suspension - KYMCO MYROAD 700i Owner's Manual

Suspension

Each shock absorber
spring preload adjustment positions for different
load or riding conditions.
Use a pin spanner
2
spring preload. Position 1 is for light loads and
smooth road conditions. Position 3 to 5 increase
spring preload for a stiffer rear suspension and can
be used when the scooter is heavily loaded.
Be certain to adjust both shock absorbers to the
same spring preload positions.
Standard spring preload position: 3
Always adjust the shock absorber pre-load
position in sequence (1-2-3-4-5 or 5-4-3-2-1).
Attempting to adjust directly from 1 to 5 or 5 to 1
may damage the shock absorber.
30
CONTROLS & FEATURES
on your scooter has 5
8
to adjust the rear shock
9
CAUTION
8 9