Ignition Switch - KYMCO MYROAD 700i Owner's Manual

IGNITION SWITCH

To operate the ignition switch and it s functions:
" " Position:
All electrical circuits are off. The engine will not
start or run.
" " Position:
The ignition circuit is "ON" and engine can now be
started. The key can not be removed from the
ignition switch in this position.
" " Position:
To lock the steering, turn the handlebar all the way
to the left, push down and turn the key to the "
position and remove the key. All electrical circuits
are off.
" " Position:
With the ignition key at the "
engine is running), push the key in and turn it
counterclockwise from "
SECTION 2 -
CONTROLS&FEATURES
With the ignition key in the "
'
engine is not running), turn the counterclockwise
from the "
Pull up on the back portion of the seat to lift it up.
"
To open the fuel filler cap, turn the key to the "
position. Make sure that the key is at the "
position when starting the engine.
"
" position (the
" to the position.
" "
" "
" to the position.
" Position:
" position (the
2
"
"
9