Transmission Oil Change - KYMCO MYROAD 700i Owner's Manual

TRANSMISSION OIL
Oil change
1. Place the scooter in its center stand.
2. Remove the transmission oil drain bolt (1).
3. Remove the transmission oil filler bolt (2), then slowly
rotate the rear wheel to drain the oil.
After draining the oil completely, install the oil drain bolt
with a new sealing washer and tighten it.
4. Fill the transmission with recommended oil to the
4
capacity listed below.
Recommended transmission oil: SAE 90
Oil capacity: 0.40 L 0.40 L
Oil exchanging capacity: 0.32L
5. Install the transmission oil filler bolt with a new sealing
washer and tighten it.
43
MAINTENANCE
(1)
(2)