TEC B-670 Series Maintenance Manual page 86

6. DIAG. TEST OPERATION
6.6.2 Parameter Clear
Press the [PAUSE] key.
Press the [FEED]
key and
[RESTART] key at
the same time.
NOTE: Confirm that "COMPLETE" is displayed, then turn the power off.
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
< 1 > D I A G N O S T I C
Press the [FEED] key four times.
< 5 > R A M C L E A R
Press the [PAUSE] key.
N O R A M C L E A R
Press the [FEED] key twice.
(or press the [RESTART] key.)
P A R A M E T E R
Press the [PAUSE] key.
C O M P L E T E
Turn off the power (See NOTE 1)
6-57
V 1 . O A
C L E A R
EM18-33017
6.6 RAM CLEAR MODE