TEC B-670 Series Maintenance Manual page 52

6. DIAG. TEST OPERATION
X axis Fine Adjustment Example
To down printing
+0.0 mm
-50.0 mm
+50.0 mm
NOTES: 4. The X axis fine adjustment is performed to fine adjust the X axis of the drawing in
5. Adjust the X axis in the effective print range. (After the value reaches the
6. X axis fine adjustment cannot be used in self test mode or test printing.
X
Y
-50.0 mm
ABC
+ 50.0 mm
the left or right direction.
coordinate "0", the value remains unchanged even if the subsequent fine adjustment
is performed in the negative direction.)
Feed direction
ABC
X
ABC
6-23
6.3 PARAMETER SETTING MODE
Fig. 6-18
Y
Bottom first printing
Fig. 6-19
Fig. 6-20
EM18-33017