TEC B-670 Series Maintenance Manual page 74

6. DIAG. TEST OPERATION
7. Pressing the [FEED] key changes the label length -1 mm, pressing the [RESTART]
8. When an error occurs during a test print, the error message is displayed and
9. When 'AUTO PRINT' is selected, 5 pcs. of the 3-dots slant line labels, bar code
Test Print Sample
• Slant line (1 dot)
• Slant line (3 dot)
key changes +1 mm.
printing is stopped. The error is cleared by pressing the [PAUSE] key and the
display shows "<3> TEST PRINT". Printing is not automatically resumed after the
error is cleared.
labels and character labels are printed respectively after one label is fed.
6-45
EM18-33017
6.4 TEST PRINT MODE
Fig. 6-21
Fig. 6-22