Table of Contents
Advertisement
PROCISE™ Surround Sound Processor
Configuration
30 • PROCISE™ Surround Sound Processor: PSPHD
After making all hardware connections to the PSPHD, the PSPHD must be
configured for operation. Basic configuration is performed with the Installer menu.
Advanced audio configuration options such as delay, levels, and equalization are
performed with Crestron Toolbox' PROCISE Tools utility. Information on using the
Installer menu, begins below. For information on the PROCISE Tools utility, refer to
the PROCISE Tools help file.
Open the Installer Menu
To open the Installer menu, press and hold the HOME and DISPLAY buttons for
approximately five seconds. The left-hand display will show the Installer menu home
page.
Installer Menu Home Page
INSTALLER MENU
Audio Setup
SOURCE
MODE
Navigating the Installer Menu
The following controls are used to navigate the Installer menu:
⇒ Selection Knob – Turn the selection knob to display the desired option. To
select the displayed option, press the knob.
⇒ HOME Button – Press the HOME button to return to the previous screen.
The Installer menu consists of five sections:
•
Audio Setup: Defines the speaker configuration for the room connected to
the PSPHD.
•
Network Setup: Pairs PSPHD with a connected PROAMP amplifier and
defines/displays information about the PSPHD's Ethernet configuration.
•
Control Setup: Defines/displays information about the parameters that
define the PSPHD's operation in a Crestron control environment.
•
About: Displays information about the PSPHD's firmware.
•
Exit Installer Mode: Exits the Installer menu.
Crestron PSPHD
SETUP
INFO
Operations Guide – DOC. 6837B
Advertisement
Table of Contents
