Editable Parameters Of F And M Buttons - JLCooper Electronics MCS-3800 User's Reference Manual

Editable Parameters for the Function Buttons (F and M)
Name
Press the Cancel/Clear key in the Keypad to clear the name.
Use the Cursor buttons to the left of the LCD to move the
cursor. Turn the first encoder to dial in the letters and numbers.
The top row of the LCD show the control's real (permanent)
name.
The bottom row of the LCD is the user editable name.
Command
The F and the M Buttons have a similar menu of commands.
The only difference is that the M Buttons can also be assigned
to act as Machine Enable / Disable buttons.
From the Factory, the M Buttons 1 through 4 are set to MMC
Enable Machines 1 through 4.
M5 is set to enable CS-10 Emulation.
The Command menu is on the following page.
69