Time Code Display; Display Tc And Locates Or Program Changes; Show Smpte, No Frames, Feet : Frame - JLCooper Electronics MCS-3800 User's Reference Manual

Time Code Display

The time code display responds to incoming SMPTE or MTC.
If the incoming Time Code is drop frame, the Drop Frame
indicator ("DF") will be lit.
It also displays the last locate command sent.
The time can also be displayed in Feet and Frames.
It is also used for displaying Program Change and
Bank Change commands.
Display Locates or Display Program Changes
Press Shift and Locate (Mode) to change the Keypad and
Time Code display alternately to either Locate Mode to
Program Change Mode.
Display SMPTE, No Frames, or Feet and Frames
Enter Utility Mode by pressing Shift and Assign.
Under "SHOWTC", dial in either "H:M:S:F", or "H:M:S" if you do
not want to see the frames.
Select "Ft: Frm" for film work.
Turn the right-most encoder to select the next page.
Under the word, "OFFSET", use the first encoder to dial in an
offset in hours.
82