Program Change Mode - JLCooper Electronics MCS-3800 User's Reference Manual

Program Change Mode

The Keypad has two modes of operation:
Locate Mode and Program Change Mode.
Press Shift and Locate (Mode) to alternately change from
Locate Mode to Program Change Mode.
In Locate Mode, the LED display shows time code.
In Program Change Mode, the LED display shows either
Program Change (Pch), Bank (ban), or Channel (Chan).
Program Change Mode
Pressing Mode cycles the display through Program Change
(Pch), Bank (ban), or Channel (Chan).
Type a channel number, press Enter to store.
Type a Bank number, press Enter to send it.
Type a Program Change number, press Enter to send it.
81