Table of Contents
Advertisement
Manual Timecode Entry
The Manual Timecode Entry method allows you to manually enter a timecode and
have the TransportPro command the recorder(s) to go to that location.
To use the Manual Timecode Entry method, simply perform the following:
1. Press the GOTO button.
2. Enter the desired timecode using the
blue numbered buttons.
Note: Any leading zeros do not need to be entered.
3. To compete the locate operation, press
the ENTER button. The TransportPro will
command the recorder(s) to go to that
location.
One Touch Preset and Recall
The One Touch Preset and Recall method allows you to store a location and later
recall that location. When the location is recalled, the TransportPro will command
the recorder(s) to go to that location. Up to 7 locations can be stored. Locations
can be stored regardless of the mode that the recorder is in. Locations will be
remembered even after the TransportPro is powered off.
Storing a Preset Location
Store Locate #5To store a location for later
recall, press and hold the SHIFT button, then
tap one of the location buttons (LOC1 - LOC7).
Recalling a Preset Location
Goto Locate #5To recall a location, press the
GOTO button, then tap one of the location
buttons (LOC1 - LOC7).
TransportPro RS422 User Manual
10
Goto
:
:
Goto 02:15:37:16
Goto Locate
Store Locate #5
Goto Locate #5
:
Advertisement
Table of Contents
