Transport Operation - JLCooper Electronics MCS-3800 User's Reference Manual

Transport Operation

Record Safety Feature
To use the Record button, hold Play and Record at the same
time.
Initialized State of Transports and M Buttons
In the units initialized state from the factory, (assuming that the
control assignment have not been edited), the Transports and
Jog / Shuttle have been pre-assigned to send commands
dependent upon the state of the M buttons.
M1 enables MMC Machine #1.
M2 enables MMC Machine #2.
M3 enables MMC Machine #3.
M4 enables MMC Machine #4.
If you are controlling machines that respond to MIDI Machine
Control, you will want to make sure that the machines are set
to the correct ID#, and the MMC is enabled. The procedures for
doing this vary widely, and you will need to consult the
documentation accompanying the machine.
M5 enables CS-10 Emulation.
2
The CS-10 and CS-10 are widely used MIDI Controllers from
JLCooper. They are supported by most disk-based audio
editing systems.
57