The System Section; Utility Mode - JLCooper Electronics MCS-3800 User's Reference Manual

The System Section

This chapter discusses the Utility Mode, the
Time Code Display, and Program Change Mode.
Utility Mode is used to control certain basic operating
conditions, including such things as Memory Protect, Bank
Names, and Memory Bulk Dump, etc.
The Time Code Display features a Drop Frame indicator.
Time can be displayed in either SMPTE Time in
hours : minutes : seconds: frames, or simply in
hours : minutes : seconds.
Alternately, the display can be set to Feet : Frames, with an
Offset.
Program Change Mode allows the Keypad to be used to send
MIDI Program and Bank Change commands.
Entering Utility Mode
Enter Utility Mode by pressing Shift and Assign.
Utility has three pages, selected with the right-most encoder.
Exiting Utility Mode
Exit Utility Mode by pressing Assign.
77