Showtc; Bank Name; Offset (Feet And Frames) - JLCooper Electronics MCS-3800 User's Reference Manual

SHOWTC

Selects the mode in which incoming time code is displayed in
the 7 -segment LED display.
H:M:S:F means hours : minutes : seconds : frames.
01.32.52.20
H:M:S, means hours : minutes : seconds. Frames are turned off.
01.21.11
Ft :Frm, means Feet and Frames, for film work.
0020.. 00

Bank Name

Allows you to enter a name for each Bank.
When not in Assign Mode, the LCD will normally displays
either the Bank Name or the Encoder names, depending on
whether or not a Page LED is lit.
Press Cancel/ Clear to clear a name.
Use Cursor buttons to move the cursor.
Use the Encoders under each name to dial in a new name.
After exiting Utility Mode, the Bank Name is displayed
whenever the Page LEDs are all off.
OFFSET
For Feet and Frame display mode (see above). A number
entered in hours which is subtracted from the incoming time
code.
For example, if the reel you are working with has time code
that starts at 1 hour, enter 1 hour so feet frame display will start
at 0 feet.
79