F And M Button Command Types - JLCooper Electronics MCS-3800 User's Reference Manual

F and M Button Command Types

• Off (that is, sends no command)
• Note
• Ctrl (Controller)
• P Change (Program Change)
• Query (Puts MCS Controller nto Query Mode.)
• Jog (Turns Jog /Shuttle Wheel On and Off)
• GMaster (Turns Grand Master Fader On and Off)
• Play (MMC and or 9 Pin Play)
• Stop (MMC and or 9 Pin Stop )
• REW (MMC and or 9 Pin Rewind)
• FF (MMC and or 9 Pin Fast Forward)
• REC (MMC and or 9 Pin Record)
• RTZ (MMC and or 9 Pin Return to Zero)
• SLOPLAY (MMC and or 9 Pin 1/2 speed play)
• RV PLAY (MMC and or 9 Pin Reverse Play)
• EJECT (MMC EJECT)
• CHASE (Puts MMC or 9 Pin machine into Chase Mode.)
In addition, the M Buttons menu is a little longer, to allow for
assigning the M Buttons to their Machine Enable feature.
In one of these settings, the M Buttons do not actually send
commands. Rather, they modify the commands sent by the
Transports, Jog / Shuttle, and Locates.
Additional M Buttons Command Menu Items:
• MMC (that is, turn MMC Commands on or off)
• CS-10 (that is, turn CS-10 Emulation on or off.)
If 9 Pin or GPI cards are present
• 9 Pin 1 (that is, turn 9 Pin card in Slot 1 on or off.)
• 9 Pin 2 (that is, turn 9 Pin card in Slot 2 on or off.)
• GPI 1 (that is, turn GPI card in Slot 1 on or off.)
• GPI 2 (that is, turn GPI card in Slot 2 on or off.)
70