Static Routes; Configuring Static Routes - NETGEAR FVX538 - ProSafe VPN Firewall 200 Router Reference Manual

ProSafe VPN Firewall 200 FVX538 Reference Manual
6. Click Apply to save your settings. The DMZ LED next to LAN port 8 (see
Rear Panels" on page
If another device on your DMZ network will be the DHCP server, or if you will manually
configure all devices, leave the Disable option (default) checked.
To define the DMZ WAN Rules and LAN DMZ Rules, see
page 4-12 and "Setting LAN DMZ Rules" on page

Static Routes

Static Routes provide additional routing information to your firewall. Under normal
circumstances, the firewall has adequate routing information after it has been configured for
Internet access, and you do not need to configure additional static routes. You should configure
static routes only for unusual cases such as multiple firewalls or multiple IP subnets located on
your network.

Configuring Static Routes

To add or edit a static route:
1. Select Network Configuration from the main menu and Routing from the submenu. The
Routing screen will display.
2. Click Add. The Add Static Route menu, shown below, will display.
3. Enter a route name for this static route in the Route Name field (for identification and
management).
3-12
1-6) will light up indicating that the DMZ port has been enabled.
v1.0, March 2009
"Setting DMZ WAN Rules" on
4-14, respectively.
"Router Front and
LAN Configuration